- diffuse_varThe variable that's diffusing.
C++ Type:std::vector<VariableName>
Unit:(no unit assumed)
Controllable:No
Description:The variable that's diffusing.
- prop_namethe name of the material property we are going to use
C++ Type:MaterialPropertyName
Unit:(no unit assumed)
Controllable:No
Description:the name of the material property we are going to use
- variableThe name of the variable that this object applies to
C++ Type:AuxVariableName
Unit:(no unit assumed)
Controllable:No
Description:The name of the variable that this object applies to
MatDiffusionAux
buildconstruction:Undocumented Class
The MatDiffusionAux has not been documented. The content listed below should be used as a starting point for documenting the class, which includes the typical automatic documentation associated with a MooseObject; however, what is contained is ultimately determined by what is necessary to make the documentation clear for users.
Overview
Example Input File Syntax
Input Parameters
- blockThe list of blocks (ids or names) that this object will be applied
C++ Type:std::vector<SubdomainName>
Unit:(no unit assumed)
Controllable:No
Description:The list of blocks (ids or names) that this object will be applied
- boundaryThe list of boundaries (ids or names) from the mesh where this object applies
C++ Type:std::vector<BoundaryName>
Unit:(no unit assumed)
Controllable:No
Description:The list of boundaries (ids or names) from the mesh where this object applies
- check_boundary_restrictedTrueWhether to check for multiple element sides on the boundary in the case of a boundary restricted, element aux variable. Setting this to false will allow contribution to a single element's elemental value(s) from multiple boundary sides on the same element (example: when the restricted boundary exists on two or more sides of an element, such as at a corner of a mesh
Default:True
C++ Type:bool
Unit:(no unit assumed)
Controllable:No
Description:Whether to check for multiple element sides on the boundary in the case of a boundary restricted, element aux variable. Setting this to false will allow contribution to a single element's elemental value(s) from multiple boundary sides on the same element (example: when the restricted boundary exists on two or more sides of an element, such as at a corner of a mesh
- execute_onLINEAR TIMESTEP_ENDThe list of flag(s) indicating when this object should be executed. For a description of each flag, see https://mooseframework.inl.gov/source/interfaces/SetupInterface.html.
Default:LINEAR TIMESTEP_END
C++ Type:ExecFlagEnum
Unit:(no unit assumed)
Options:NONE, INITIAL, LINEAR, NONLINEAR_CONVERGENCE, NONLINEAR, POSTCHECK, TIMESTEP_END, TIMESTEP_BEGIN, MULTIAPP_FIXED_POINT_END, MULTIAPP_FIXED_POINT_BEGIN, FINAL, CUSTOM, PRE_DISPLACE
Controllable:No
Description:The list of flag(s) indicating when this object should be executed. For a description of each flag, see https://mooseframework.inl.gov/source/interfaces/SetupInterface.html.
- prop_getter_suffixAn optional suffix parameter that can be appended to any attempt to retrieve/get material properties. The suffix will be prepended with a '_' character.
C++ Type:MaterialPropertyName
Unit:(no unit assumed)
Controllable:No
Description:An optional suffix parameter that can be appended to any attempt to retrieve/get material properties. The suffix will be prepended with a '_' character.
- use_interpolated_stateFalseFor the old and older state use projected material properties interpolated at the quadrature points. To set up projection use the ProjectedStatefulMaterialStorageAction.
Default:False
C++ Type:bool
Unit:(no unit assumed)
Controllable:No
Description:For the old and older state use projected material properties interpolated at the quadrature points. To set up projection use the ProjectedStatefulMaterialStorageAction.
Optional Parameters
- control_tagsAdds user-defined labels for accessing object parameters via control logic.
C++ Type:std::vector<std::string>
Unit:(no unit assumed)
Controllable:No
Description:Adds user-defined labels for accessing object parameters via control logic.
- enableTrueSet the enabled status of the MooseObject.
Default:True
C++ Type:bool
Unit:(no unit assumed)
Controllable:Yes
Description:Set the enabled status of the MooseObject.
- seed0The seed for the master random number generator
Default:0
C++ Type:unsigned int
Unit:(no unit assumed)
Controllable:No
Description:The seed for the master random number generator
- use_displaced_meshFalseWhether or not this object should use the displaced mesh for computation. Note that in the case this is true but no displacements are provided in the Mesh block the undisplaced mesh will still be used.
Default:False
C++ Type:bool
Unit:(no unit assumed)
Controllable:No
Description:Whether or not this object should use the displaced mesh for computation. Note that in the case this is true but no displacements are provided in the Mesh block the undisplaced mesh will still be used.
Advanced Parameters
Input Files
- (problems/nts-temp-delayed.i)
- (problems/gmsh-two-mat-multiple-pin.i)
- (problems/gmsh-3d-coupled-nts-temp.i)
- (problems/msr-couple-temp-nts-2x2-10xPow.i)
- (problems/gmsh-mesh-one-material.i)
- (tests/nts/gen-mesh-one-material.i)
- (problems/transient-jac-test.i)
- (problems/gmsh-mesh-two-materials.i)
- (problems/debug-precursor-action.i)
- (problems/axi-nts-temp-delayed.i)
- (problems/gen-mesh-one-material.i)
(problems/nts-temp-delayed.i)
[GlobalParams]
num_groups = 2
# temperature = temp
group_fluxes = 'group1 group2'
# MSRE full power = 10 MW; core volume 90 ft3
# power = 20
[]
[Mesh]
file = 'cylinder.msh'
[]
[Variables]
[group1]
order = FIRST
family = LAGRANGE
[]
[group2]
order = FIRST
family = LAGRANGE
[]
# [./temp]
# order = FIRST
# family = LAGRANGE
# # scaling = 1e-3
# [../]
[]
[Kernels]
# Neutronics
# [./time_group1]
# type = NtTimeDerivative
# grou_number = 1
# variable = group1
# [../]
# [./time_group2]
# type = NtTimeDerivative
# grou_number = 2
# variable = group2
# [../]
[diff_group1]
type = GroupDiffusion
variable = group1
group_number = 1
[]
[diff_group2]
type = GroupDiffusion
variable = group2
group_number = 2
[]
[sigma_r_group1]
type = SigmaR
variable = group1
group_number = 1
[]
[sigma_r_group2]
type = SigmaR
variable = group2
group_number = 2
[]
[inscatter_group1]
type = InScatter
variable = group1
group_number = 1
num_groups = 2
group_fluxes = 'group1 group2'
[]
[inscatter_group2]
type = InScatter
variable = group2
group_number = 2
num_groups = 2
group_fluxes = 'group1 group2'
[]
[fission_source_group1]
type = CoupledFissionEigenKernel
variable = group1
group_number = 1
num_groups = 2
group_fluxes = 'group1 group2'
[]
[fission_source_group2]
type = CoupledFissionEigenKernel
variable = group2
group_number = 2
num_groups = 2
group_fluxes = 'group1 group2'
[]
# [./fission_source_group1]
# type = CoupledFissionKernel
# variable = group1
# group_number = 1
# num_groups = 2
# group_fluxes = 'group1 group2'
# [../]
# [./fission_source_group2]
# type = CoupledFissionKernel
# variable = group2
# group_number = 2
# num_groups = 2
# group_fluxes = 'group1 group2'
# [../]
# # Temperature
# [./temp_cond]
# type = MatDiffusion
# variable = temp
# prop_name = 'k'
# save_in = 'diffus_resid tot_resid'
# [../]
# [./temp_source]
# type = FissionHeatSource
# tot_fissions = tot_fissions
# variable = temp
# save_in = 'src_resid tot_resid'
# [../]
[]
[AuxVariables]
# [./Qf]
# family = MONOMIAL
# order = CONSTANT
# [../]
# [./diffus_temp]
# family = MONOMIAL
# order = CONSTANT
# [../]
# [./diffus_resid]
# family = LAGRANGE
# order = FIRST
# [../]
# [./src_resid]
# family = LAGRANGE
# order = FIRST
# [../]
# [./bc_resid]
# family = LAGRANGE
# order = FIRST
# [../]
# [./tot_resid]
# family = LAGRANGE
# order = FIRST
# [../]
[]
[AuxKernels]
# [./Qf]
# type = FissionHeatSourceAux
# variable = Qf
# tot_fissions = tot_fissions
# [../]
# [./diffus_temp]
# type = MatDiffusionAux
# variable = diffus_temp
# diffuse_var = temp
# prop_name = 'k'
# [../]
[]
[Materials]
[fuel]
type = GenericMoltresMaterial
block = 'fuel'
property_tables_root = 'msr2g_enrU_mod_953_fuel_interp_'
num_groups = 2
num_precursor_groups = 8
prop_names = 'k'
prop_values = '.0123' # Cammi 2011 at 908 K
# prop_names = 'k d_k_d_temp'
# prop_values = '.0123 0' # Cammi 2011 at 908 K
[]
[moder]
type = GenericMoltresMaterial
block = 'moder'
property_tables_root = 'msr2g_enrU_fuel_922_mod_interp_'
num_groups = 2
num_precursor_groups = 8
prop_names = 'k'
prop_values = '.312' # Cammi 2011 at 908 K
# prop_names = 'k d_k_d_temp'
# prop_values = '.312 0' # Cammi 2011 at 908 K
[]
[]
[BCs]
# [./temp]
# boundary = boundary
# type = DirichletBC
# variable = temp
# value = 900
# save_in = 'bc_resid tot_resid'
# [../]
[group1_vacuum]
type = VacuumBC
variable = group1
boundary = 'all_top all_bottom'
[]
[group2_vacuum]
type = VacuumBC
variable = group2
boundary = 'all_top all_bottom'
[]
[]
[Executioner]
# type = NonlinearEigen
# free_power_iterations = 2
# source_abs_tol = 1e-12
# source_rel_tol = 1e-8
# output_after_power_iterations = false
type = InversePowerMethod
max_power_iterations = 50
xdiff = 'group1diff'
bx_norm = 'bnorm'
k0 = 2
pfactor = 1e-2
l_max_its = 100
# solve_type = 'PJFNK'
solve_type = 'NEWTON'
petsc_options = '-snes_converged_reason -ksp_converged_reason -snes_linesearch_monitor'
petsc_options_iname = '-pc_type -sub_pc_type'
petsc_options_value = 'asm lu'
[]
[Preconditioning]
[SMP]
type = SMP
full = true
[]
[]
[Postprocessors]
[bnorm]
type = ElmIntegTotFissNtsPostprocessor
group_fluxes = 'group1 group2'
execute_on = linear
[]
[tot_fissions]
type = ElmIntegTotFissPostprocessor
execute_on = linear
[]
[group1norm]
type = ElementIntegralVariablePostprocessor
variable = group1
execute_on = linear
[]
[group2norm]
type = ElementIntegralVariablePostprocessor
variable = group2
execute_on = linear
[]
[group1max]
type = NodalExtremeValue
value_type = max
variable = group1
execute_on = timestep_end
[]
[group2max]
type = NodalExtremeValue
value_type = max
variable = group2
execute_on = timestep_end
[]
[group1diff]
type = ElementL2Diff
variable = group1
execute_on = 'linear timestep_end'
use_displaced_mesh = false
[]
[]
[Outputs]
[out]
type = Exodus
execute_on = 'timestep_end'
[]
[]
[Debug]
show_var_residual_norms = true
[]
# [ICs]
# [./temp_ic]
# type = ConstantIC
# variable = temp
# value = 900
# [../]
# []
(problems/gmsh-two-mat-multiple-pin.i)
[GlobalParams]
num_groups = 2
temperature = temp
group_fluxes = 'group1 group2'
# MSRE full power = 10 MW; core volume 90 ft3
power = 10
[]
[Mesh]
file = '/home/lindsayad/gdrive/gmsh-scripts/2d-msr-more-pins.msh'
[]
[Variables]
[group1]
order = FIRST
family = LAGRANGE
[]
[group2]
order = FIRST
family = LAGRANGE
[]
[temp]
order = FIRST
family = LAGRANGE
scaling = 1e-6
[]
[]
[Kernels]
# Neutronics
[diff_group1]
type = GroupDiffusion
variable = group1
group_number = 1
[]
[diff_group2]
type = GroupDiffusion
variable = group2
group_number = 2
[]
[sigma_r_group1]
type = SigmaR
variable = group1
group_number = 1
[]
[sigma_r_group2]
type = SigmaR
variable = group2
group_number = 2
[]
[inscatter_group1]
type = InScatter
variable = group1
group_number = 1
num_groups = 2
group_fluxes = 'group1 group2'
[]
[inscatter_group2]
type = InScatter
variable = group2
group_number = 2
num_groups = 2
group_fluxes = 'group1 group2'
[]
[fission_source_group1]
type = CoupledFissionEigenKernel
variable = group1
group_number = 1
num_groups = 2
group_fluxes = 'group1 group2'
[]
[fission_source_group2]
type = CoupledFissionEigenKernel
variable = group2
group_number = 2
num_groups = 2
group_fluxes = 'group1 group2'
[]
# Temperature
[temp_cond]
type = MatDiffusion
variable = temp
prop_name = 'k'
save_in = 'diffus_resid tot_resid'
[]
# [./temp_cond]
# type = HeatConduction
# diffusion_coefficient_name = k
# diffusion_coefficient_dT_name = d_k_d_temp
# use_displaced_mesh = false
# variable = temp
# [../]
[temp_source]
type = FissionHeatSource
tot_fissions = tot_fissions
variable = temp
save_in = 'src_resid tot_resid'
[]
[]
[AuxVariables]
[Qf]
family = MONOMIAL
order = CONSTANT
[]
[diffus_temp]
family = MONOMIAL
order = CONSTANT
[]
[diffus_resid]
family = LAGRANGE
order = FIRST
[]
[src_resid]
family = LAGRANGE
order = FIRST
[]
[bc_resid]
family = LAGRANGE
order = FIRST
[]
[tot_resid]
family = LAGRANGE
order = FIRST
[]
[]
[AuxKernels]
[Qf]
type = FissionHeatSourceAux
variable = Qf
tot_fissions = tot_fissions
[]
[diffus_temp]
type = MatDiffusionAux
variable = diffus_temp
diffuse_var = temp
prop_name = 'k'
[]
[]
[Materials]
[fuel]
type = GenericMoltresMaterial
block = 'fuel'
property_tables_root = '/home/lindsayad/serpent/core/examples/serpent-input/msre/msr2g_enrU_mod_953_fuel_interp_'
num_groups = 2
prop_names = 'k'
prop_values = '.0123' # Cammi 2011 at 908 K
# prop_names = 'k d_k_d_temp'
# prop_values = '.0123 0' # Cammi 2011 at 908 K
[]
[moder]
type = GenericMoltresMaterial
block = 'moder'
property_tables_root = '/home/lindsayad/serpent/core/examples/serpent-input/msre/msr2g_enrU_fuel_922_mod_interp_'
num_groups = 2
prop_names = 'k'
prop_values = '.312' # Cammi 2011 at 908 K
# prop_names = 'k d_k_d_temp'
# prop_values = '.312 0' # Cammi 2011 at 908 K
[]
[]
[BCs]
[temp]
boundary = 'boundary'
type = DirichletBC
variable = temp
value = 900
save_in = 'bc_resid tot_resid'
[]
# [./temp]
# boundary = boundary
# type = VacuumBC
# variable = temp
# [../]
[]
[Executioner]
# type = NonlinearEigen
# free_power_iterations = 4
# source_abs_tol = 1e-12
# source_rel_tol = 1e-8
# output_after_power_iterations = true
type = InversePowerMethod
max_power_iterations = 50
xdiff = 'group1diff'
bx_norm = 'bnorm'
k0 = 1.0
pfactor = 1e-2
l_max_its = 100
solve_type = 'PJFNK'
# solve_type = 'NEWTON'
petsc_options = '-snes_converged_reason -ksp_converged_reason -snes_linesearch_monitor'
# petsc_options_iname = '-pc_type -sub_pc_type'
# petsc_options_value = 'asm lu'
[]
[Preconditioning]
[SMP]
type = SMP
# full = true
[]
[]
[Postprocessors]
[bnorm]
type = ElmIntegTotFissNtsPostprocessor
group_fluxes = 'group1 group2'
execute_on = linear
[]
[tot_fissions]
type = ElmIntegTotFissPostprocessor
execute_on = linear
[]
[group1norm]
type = ElementIntegralVariablePostprocessor
variable = group1
execute_on = linear
[]
[group2norm]
type = ElementIntegralVariablePostprocessor
variable = group2
execute_on = linear
[]
[group1max]
type = NodalExtremeValue
value_type = max
variable = group1
execute_on = timestep_end
[]
[group2max]
type = NodalExtremeValue
value_type = max
variable = group2
execute_on = timestep_end
[]
[src_resid_post]
type = NodalL2Norm
variable = src_resid
execute_on = nonlinear
[]
[diffus_resid_post]
type = NodalL2Norm
variable = diffus_resid
execute_on = nonlinear
[]
[bc_resid_post]
type = NodalL2Norm
variable = bc_resid
execute_on = nonlinear
[]
[tot_resid_post]
type = NodalL2Norm
variable = tot_resid
execute_on = nonlinear
[]
[group1diff]
type = ElementL2Diff
variable = group1
execute_on = 'linear timestep_end'
use_displaced_mesh = false
[]
[]
[Outputs]
[out]
type = Exodus
execute_on = 'timestep_end'
[]
[]
[Debug]
show_var_residual_norms = true
[]
[ICs]
[temp_ic]
type = ConstantIC
variable = temp
value = 900
[]
[]
(problems/gmsh-3d-coupled-nts-temp.i)
[GlobalParams]
num_groups = 2
temperature = temp
group_fluxes = 'group1 group2'
# MSRE full power = 10 MW; core volume 90 ft3
power = 20
[]
[Mesh]
file = 'msr-small.msh'
[]
[Variables]
[group1]
order = FIRST
family = LAGRANGE
[]
[group2]
order = FIRST
family = LAGRANGE
[]
[temp]
order = FIRST
family = LAGRANGE
# scaling = 1e-3
[]
[]
[Kernels]
# Neutronics
[diff_group1]
type = GroupDiffusion
variable = group1
group_number = 1
[]
[diff_group2]
type = GroupDiffusion
variable = group2
group_number = 2
[]
[sigma_r_group1]
type = SigmaR
variable = group1
group_number = 1
[]
[sigma_r_group2]
type = SigmaR
variable = group2
group_number = 2
[]
[inscatter_group1]
type = InScatter
variable = group1
group_number = 1
num_groups = 2
group_fluxes = 'group1 group2'
[]
[inscatter_group2]
type = InScatter
variable = group2
group_number = 2
num_groups = 2
group_fluxes = 'group1 group2'
[]
[fission_source_group1]
type = CoupledFissionEigenKernel
variable = group1
group_number = 1
num_groups = 2
group_fluxes = 'group1 group2'
[]
[fission_source_group2]
type = CoupledFissionEigenKernel
variable = group2
group_number = 2
num_groups = 2
group_fluxes = 'group1 group2'
[]
# Temperature
[temp_cond]
type = MatDiffusion
variable = temp
prop_name = 'k'
save_in = 'diffus_resid tot_resid'
[]
# [./temp_cond]
# type = HeatConduction
# diffusion_coefficient_name = k
# diffusion_coefficient_dT_name = d_k_d_temp
# use_displaced_mesh = false
# variable = temp
# [../]
[temp_source]
type = FissionHeatSource
tot_fissions = tot_fissions
variable = temp
save_in = 'src_resid tot_resid'
[]
[]
[AuxVariables]
[Qf]
family = MONOMIAL
order = CONSTANT
[]
[diffus_temp]
family = MONOMIAL
order = CONSTANT
[]
[diffus_resid]
family = LAGRANGE
order = FIRST
[]
[src_resid]
family = LAGRANGE
order = FIRST
[]
[bc_resid]
family = LAGRANGE
order = FIRST
[]
[tot_resid]
family = LAGRANGE
order = FIRST
[]
[]
[AuxKernels]
[Qf]
type = FissionHeatSourceAux
variable = Qf
tot_fissions = tot_fissions
[]
[diffus_temp]
type = MatDiffusionAux
variable = diffus_temp
diffuse_var = temp
prop_name = 'k'
[]
[]
[Materials]
[fuel]
type = GenericMoltresMaterial
block = 'fuel'
property_tables_root = 'msr2g_enrU_mod_953_fuel_interp_'
num_groups = 2
prop_names = 'k'
prop_values = '.0123' # Cammi 2011 at 908 K
# prop_names = 'k d_k_d_temp'
# prop_values = '.0123 0' # Cammi 2011 at 908 K
[]
[moder]
type = GenericMoltresMaterial
block = 'moder'
property_tables_root = 'msr2g_enrU_fuel_922_mod_interp_'
num_groups = 2
prop_names = 'k'
prop_values = '.312' # Cammi 2011 at 908 K
# prop_names = 'k d_k_d_temp'
# prop_values = '.312 0' # Cammi 2011 at 908 K
[]
[]
[BCs]
[temp]
boundary = boundary
type = DirichletBC
variable = temp
value = 900
save_in = 'bc_resid tot_resid'
[]
# [./temp]
# boundary = boundary
# type = VacuumBC
# variable = temp
# [../]
[]
[Executioner]
type = NonlinearEigen
free_power_iterations = 2
source_abs_tol = 1e-12
source_rel_tol = 1e-8
output_after_power_iterations = false
# type = InversePowerMethod
# max_power_iterations = 50
# xdiff = 'group1diff'
bx_norm = 'bnorm'
k0 = 2
pfactor = 1e-2
l_max_its = 100
solve_type = 'PJFNK'
# solve_type = 'NEWTON'
petsc_options = '-snes_converged_reason -ksp_converged_reason -snes_linesearch_monitor'
petsc_options_iname = '-pc_type -sub_pc_type'
petsc_options_value = 'asm lu'
[]
[Preconditioning]
[SMP]
type = SMP
full = true
[]
[]
[Postprocessors]
[bnorm]
type = ElmIntegTotFissNtsPostprocessor
group_fluxes = 'group1 group2'
execute_on = linear
[]
[tot_fissions]
type = ElmIntegTotFissPostprocessor
execute_on = linear
[]
[group1norm]
type = ElementIntegralVariablePostprocessor
variable = group1
execute_on = linear
[]
[group2norm]
type = ElementIntegralVariablePostprocessor
variable = group2
execute_on = linear
[]
[group1max]
type = NodalExtremeValue
value_type = max
variable = group1
execute_on = timestep_end
[]
[group2max]
type = NodalExtremeValue
value_type = max
variable = group2
execute_on = timestep_end
[]
# [./src_resid_post]
# type = NodalL2Norm
# variable = src_resid
# execute_on = nonlinear
# [../]
# [./diffus_resid_post]
# type = NodalL2Norm
# variable = diffus_resid
# execute_on = nonlinear
# [../]
# [./bc_resid_post]
# type = NodalL2Norm
# variable = bc_resid
# execute_on = nonlinear
# [../]
# [./tot_resid_post]
# type = NodalL2Norm
# variable = tot_resid
# execute_on = nonlinear
# [../]
# [./group1diff]
# type = ElementL2Diff
# variable = group1
# execute_on = 'linear timestep_end'
# use_displaced_mesh = false
# [../]
[]
[Outputs]
[out]
type = Exodus
execute_on = 'timestep_end'
[]
[]
[Debug]
show_var_residual_norms = true
[]
# [ICs]
# [./temp_ic]
# type = ConstantIC
# variable = temp
# value = 900
# [../]
# []
(problems/msr-couple-temp-nts-2x2-10xPow.i)
[GlobalParams]
num_groups = 2
temperature = temp
group_fluxes = 'group1 group2'
# MSRE full power = 10 MW; core volume 90 ft3
power = 20
[]
[Mesh]
file = '/home/lindsayad/gdrive/gmsh-scripts/msr-small.msh'
[]
[Variables]
[group1]
order = FIRST
family = LAGRANGE
[]
[group2]
order = FIRST
family = LAGRANGE
[]
[temp]
order = FIRST
family = LAGRANGE
# scaling = 1e-3
[]
[]
[Kernels]
# Neutronics
[diff_group1]
type = GroupDiffusion
variable = group1
group_number = 1
[]
[diff_group2]
type = GroupDiffusion
variable = group2
group_number = 2
[]
[sigma_r_group1]
type = SigmaR
variable = group1
group_number = 1
[]
[sigma_r_group2]
type = SigmaR
variable = group2
group_number = 2
[]
[inscatter_group1]
type = InScatter
variable = group1
group_number = 1
num_groups = 2
group_fluxes = 'group1 group2'
[]
[inscatter_group2]
type = InScatter
variable = group2
group_number = 2
num_groups = 2
group_fluxes = 'group1 group2'
[]
[fission_source_group1]
type = CoupledFissionEigenKernel
variable = group1
group_number = 1
num_groups = 2
group_fluxes = 'group1 group2'
[]
[fission_source_group2]
type = CoupledFissionEigenKernel
variable = group2
group_number = 2
num_groups = 2
group_fluxes = 'group1 group2'
[]
# Temperature
[temp_cond]
type = MatDiffusion
variable = temp
prop_name = 'k'
save_in = 'diffus_resid tot_resid'
[]
# [./temp_cond]
# type = HeatConduction
# diffusion_coefficient_name = k
# diffusion_coefficient_dT_name = d_k_d_temp
# use_displaced_mesh = false
# variable = temp
# [../]
[temp_source]
type = FissionHeatSource
tot_fissions = tot_fissions
variable = temp
save_in = 'src_resid tot_resid'
[]
[]
[AuxVariables]
[Qf]
family = MONOMIAL
order = CONSTANT
[]
[diffus_temp]
family = MONOMIAL
order = CONSTANT
[]
[diffus_resid]
family = LAGRANGE
order = FIRST
[]
[src_resid]
family = LAGRANGE
order = FIRST
[]
[bc_resid]
family = LAGRANGE
order = FIRST
[]
[tot_resid]
family = LAGRANGE
order = FIRST
[]
[]
[AuxKernels]
[Qf]
type = FissionHeatSourceAux
variable = Qf
tot_fissions = tot_fissions
[]
[diffus_temp]
type = MatDiffusionAux
variable = diffus_temp
diffuse_var = temp
prop_name = 'k'
[]
[]
[Materials]
[fuel]
type = GenericMoltresMaterial
block = 'fuel'
property_tables_root = '/home/lindsayad/serpent/core/examples/serpent-input/msre/msr2g_enrU_mod_953_fuel_interp_'
num_groups = 2
prop_names = 'k'
prop_values = '.0123' # Cammi 2011 at 908 K
# prop_names = 'k d_k_d_temp'
# prop_values = '.0123 0' # Cammi 2011 at 908 K
[]
[moder]
type = GenericMoltresMaterial
block = 'moder'
property_tables_root = '/home/lindsayad/serpent/core/examples/serpent-input/msre/msr2g_enrU_fuel_922_mod_interp_'
num_groups = 2
prop_names = 'k'
prop_values = '.312' # Cammi 2011 at 908 K
# prop_names = 'k d_k_d_temp'
# prop_values = '.312 0' # Cammi 2011 at 908 K
[]
[]
[BCs]
[temp]
boundary = boundary
type = DirichletBC
variable = temp
value = 900
save_in = 'bc_resid tot_resid'
[]
# [./temp]
# boundary = boundary
# type = VacuumBC
# variable = temp
# [../]
[]
[Executioner]
type = NonlinearEigen
free_power_iterations = 2
source_abs_tol = 1e-12
source_rel_tol = 1e-8
output_after_power_iterations = false
# type = InversePowerMethod
# max_power_iterations = 50
# xdiff = 'group1diff'
bx_norm = 'bnorm'
k0 = 1.0
pfactor = 1e-2
l_max_its = 100
# solve_type = 'PJFNK'
solve_type = 'NEWTON'
petsc_options = '-snes_converged_reason -ksp_converged_reason -snes_linesearch_monitor'
petsc_options_iname = '-pc_type -sub_pc_type'
petsc_options_value = 'asm lu'
[]
[Preconditioning]
[SMP]
type = SMP
full = true
[]
[]
[Postprocessors]
[bnorm]
type = ElmIntegTotFissNtsPostprocessor
group_fluxes = 'group1 group2'
execute_on = linear
[]
[tot_fissions]
type = ElmIntegTotFissPostprocessor
execute_on = linear
[]
[group1norm]
type = ElementIntegralVariablePostprocessor
variable = group1
execute_on = linear
[]
[group2norm]
type = ElementIntegralVariablePostprocessor
variable = group2
execute_on = linear
[]
[group1max]
type = NodalExtremeValue
value_type = max
variable = group1
execute_on = timestep_end
[]
[group2max]
type = NodalExtremeValue
value_type = max
variable = group2
execute_on = timestep_end
[]
[src_resid_post]
type = NodalL2Norm
variable = src_resid
execute_on = nonlinear
[]
[diffus_resid_post]
type = NodalL2Norm
variable = diffus_resid
execute_on = nonlinear
[]
[bc_resid_post]
type = NodalL2Norm
variable = bc_resid
execute_on = nonlinear
[]
[tot_resid_post]
type = NodalL2Norm
variable = tot_resid
execute_on = nonlinear
[]
[group1diff]
type = ElementL2Diff
variable = group1
execute_on = 'linear timestep_end'
use_displaced_mesh = false
[]
[]
[Outputs]
[out]
type = Exodus
execute_on = 'timestep_end'
[]
[]
[Debug]
show_var_residual_norms = true
[]
# [ICs]
# [./temp_ic]
# type = ConstantIC
# variable = temp
# value = 900
# [../]
# []
(problems/gmsh-mesh-one-material.i)
[GlobalParams]
num_groups = 2
temperature = temp
group_fluxes = 'group1 group2'
# MSRE full power = 10 MW; core volume 90 ft3
power = 10
[]
[Mesh]
file = '/home/lindsayad/gdrive/gmsh-scripts/2d-one-mat.msh'
[]
[Variables]
[group1]
order = FIRST
family = LAGRANGE
[]
[group2]
order = FIRST
family = LAGRANGE
[]
[temp]
order = FIRST
family = LAGRANGE
scaling = 1e-6
[]
[]
[Kernels]
# Neutronics
[diff_group1]
type = GroupDiffusion
variable = group1
group_number = 1
[]
[diff_group2]
type = GroupDiffusion
variable = group2
group_number = 2
[]
[sigma_r_group1]
type = SigmaR
variable = group1
group_number = 1
[]
[sigma_r_group2]
type = SigmaR
variable = group2
group_number = 2
[]
[inscatter_group1]
type = InScatter
variable = group1
group_number = 1
num_groups = 2
group_fluxes = 'group1 group2'
[]
[inscatter_group2]
type = InScatter
variable = group2
group_number = 2
num_groups = 2
group_fluxes = 'group1 group2'
[]
[fission_source_group1]
type = CoupledFissionEigenKernel
variable = group1
group_number = 1
num_groups = 2
group_fluxes = 'group1 group2'
[]
[fission_source_group2]
type = CoupledFissionEigenKernel
variable = group2
group_number = 2
num_groups = 2
group_fluxes = 'group1 group2'
[]
# Temperature
[temp_cond]
type = MatDiffusion
variable = temp
prop_name = 'k'
save_in = 'diffus_resid tot_resid'
[]
# [./temp_cond]
# type = HeatConduction
# diffusion_coefficient_name = k
# diffusion_coefficient_dT_name = d_k_d_temp
# use_displaced_mesh = false
# variable = temp
# [../]
[temp_source]
type = FissionHeatSource
tot_fissions = tot_fissions
variable = temp
save_in = 'src_resid tot_resid'
[]
[]
[AuxVariables]
[Qf]
family = MONOMIAL
order = CONSTANT
[]
[diffus_temp]
family = MONOMIAL
order = CONSTANT
[]
[diffus_resid]
family = LAGRANGE
order = FIRST
[]
[src_resid]
family = LAGRANGE
order = FIRST
[]
[bc_resid]
family = LAGRANGE
order = FIRST
[]
[tot_resid]
family = LAGRANGE
order = FIRST
[]
[]
[AuxKernels]
[Qf]
type = FissionHeatSourceAux
variable = Qf
tot_fissions = tot_fissions
[]
[diffus_temp]
type = MatDiffusionAux
variable = diffus_temp
diffuse_var = temp
prop_name = 'k'
[]
[]
[Materials]
[fuel]
type = GenericMoltresMaterial
block = 0
property_tables_root = '/home/lindsayad/serpent/core/examples/serpent-input/msre/msr2g_enrU_mod_953_fuel_interp_'
num_groups = 2
prop_names = 'k'
prop_values = '.0123' # Cammi 2011 at 908 K
# prop_names = 'k d_k_d_temp'
# prop_values = '.0123 0' # Cammi 2011 at 908 K
[]
[]
[BCs]
[temp]
boundary = 'boundary'
type = DirichletBC
variable = temp
value = 900
save_in = 'bc_resid tot_resid'
[]
# [./temp]
# boundary = boundary
# type = VacuumBC
# variable = temp
# [../]
[]
[Executioner]
# type = NonlinearEigen
# free_power_iterations = 4
# source_abs_tol = 1e-12
# source_rel_tol = 1e-8
# output_after_power_iterations = true
type = InversePowerMethod
max_power_iterations = 50
xdiff = 'group1diff'
bx_norm = 'bnorm'
k0 = 1.0
pfactor = 1e-2
l_max_its = 100
solve_type = 'PJFNK'
# solve_type = 'NEWTON'
petsc_options = '-snes_converged_reason -ksp_converged_reason -snes_linesearch_monitor'
# petsc_options_iname = '-pc_type -sub_pc_type'
# petsc_options_value = 'asm lu'
[]
[Preconditioning]
[SMP]
type = SMP
# full = true
[]
[]
[Postprocessors]
[bnorm]
type = ElmIntegTotFissNtsPostprocessor
group_fluxes = 'group1 group2'
execute_on = linear
[]
[tot_fissions]
type = ElmIntegTotFissPostprocessor
execute_on = linear
[]
[group1norm]
type = ElementIntegralVariablePostprocessor
variable = group1
execute_on = linear
[]
[group2norm]
type = ElementIntegralVariablePostprocessor
variable = group2
execute_on = linear
[]
[group1max]
type = NodalExtremeValue
value_type = max
variable = group1
execute_on = timestep_end
[]
[group2max]
type = NodalExtremeValue
value_type = max
variable = group2
execute_on = timestep_end
[]
[src_resid_post]
type = NodalL2Norm
variable = src_resid
execute_on = nonlinear
[]
[diffus_resid_post]
type = NodalL2Norm
variable = diffus_resid
execute_on = nonlinear
[]
[bc_resid_post]
type = NodalL2Norm
variable = bc_resid
execute_on = nonlinear
[]
[tot_resid_post]
type = NodalL2Norm
variable = tot_resid
execute_on = nonlinear
[]
[group1diff]
type = ElementL2Diff
variable = group1
execute_on = 'linear timestep_end'
use_displaced_mesh = false
[]
[]
[Outputs]
[out]
type = Exodus
execute_on = 'timestep_end'
[]
[]
[Debug]
show_var_residual_norms = true
[]
[ICs]
[temp_ic]
type = ConstantIC
variable = temp
value = 900
[]
[]
(tests/nts/gen-mesh-one-material.i)
[GlobalParams]
num_groups = 2
num_precursor_groups = 8
temperature = temp
group_fluxes = 'group1 group2'
# MSRE full power = 10 MW; core volume 90 ft3
power = 10
use_exp_form = false
sss2_input = false
account_delayed = false
[]
[Mesh]
type = GeneratedMesh
dim = 2
xmax = 6
ymax = 6
nx = 15
ny = 15
[]
[Variables]
[group1]
order = FIRST
family = LAGRANGE
[]
[group2]
order = FIRST
family = LAGRANGE
[]
[temp]
order = FIRST
family = LAGRANGE
scaling = 1e-6
[]
[]
[Kernels]
# Neutronics
[diff_group1]
type = GroupDiffusion
variable = group1
group_number = 1
[]
[diff_group2]
type = GroupDiffusion
variable = group2
group_number = 2
[]
[sigma_r_group1]
type = SigmaR
variable = group1
group_number = 1
[]
[sigma_r_group2]
type = SigmaR
variable = group2
group_number = 2
[]
[inscatter_group1]
type = InScatter
variable = group1
group_number = 1
num_groups = 2
group_fluxes = 'group1 group2'
[]
[inscatter_group2]
type = InScatter
variable = group2
group_number = 2
num_groups = 2
group_fluxes = 'group1 group2'
[]
[fission_source_group1]
type = CoupledFissionEigenKernel
variable = group1
group_number = 1
num_groups = 2
group_fluxes = 'group1 group2'
[]
[fission_source_group2]
type = CoupledFissionEigenKernel
variable = group2
group_number = 2
num_groups = 2
group_fluxes = 'group1 group2'
[]
# Temperature
[temp_cond]
type = MatDiffusion
variable = temp
diffusivity = 'k'
save_in = 'diffus_resid tot_resid'
[]
# [./temp_cond]
# type = HeatConduction
# diffusion_coefficient_name = k
# diffusion_coefficient_dT_name = d_k_d_temp
# use_displaced_mesh = false
# variable = temp
# [../]
[temp_source]
type = FissionHeatSource
tot_fission_heat = tot_fission_heat
variable = temp
save_in = 'src_resid tot_resid'
[]
[]
[AuxVariables]
[Qf]
family = MONOMIAL
order = CONSTANT
[]
[diffus_temp]
family = MONOMIAL
order = CONSTANT
[]
[diffus_resid]
family = LAGRANGE
order = FIRST
[]
[src_resid]
family = LAGRANGE
order = FIRST
[]
[bc_resid]
family = LAGRANGE
order = FIRST
[]
[tot_resid]
family = LAGRANGE
order = FIRST
[]
[]
[AuxKernels]
[Qf]
type = FissionHeatSourceAux
variable = Qf
tot_fission_heat = tot_fission_heat
[]
[diffus_temp]
type = MatDiffusionAux
variable = diffus_temp
diffuse_var = temp
prop_name = 'k'
[]
[]
[Materials]
[fuel]
type = GenericMoltresMaterial
block = 0
property_tables_root = 'msr2g_enrU_mod_953_fuel_interp_'
prop_names = 'k'
prop_values = '.0123' # Cammi 2011 at 908 K
interp_type = spline
[]
[]
[BCs]
[temp]
boundary = 'left right top bottom'
type = DirichletBC
variable = temp
value = 900
save_in = 'bc_resid tot_resid'
[]
# [./temp]
# boundary = boundary
# type = VacuumBC
# variable = temp
# [../]
[]
[Executioner]
# type = NonlinearEigen
# free_power_iterations = 4
# source_abs_tol = 1e-12
# source_rel_tol = 1e-8
# output_after_power_iterations = true
type = InversePowerMethod
max_power_iterations = 50
xdiff = 'group1diff'
bx_norm = 'bnorm'
k0 = 1.0
pfactor = 1e-2
l_max_its = 100
solve_type = 'PJFNK'
# solve_type = 'NEWTON'
petsc_options = '-snes_converged_reason -ksp_converged_reason -snes_linesearch_monitor'
# petsc_options_iname = '-pc_type -sub_pc_type'
# petsc_options_value = 'asm lu'
[]
[Preconditioning]
[SMP]
type = SMP
# full = true
[]
[]
[Postprocessors]
[bnorm]
type = ElmIntegTotFissNtsPostprocessor
group_fluxes = 'group1 group2'
execute_on = linear
[]
[tot_fission_heat]
type = ElmIntegTotFissHeatPostprocessor
execute_on = linear
[]
[group1norm]
type = ElementIntegralVariablePostprocessor
variable = group1
execute_on = linear
[]
[group2norm]
type = ElementIntegralVariablePostprocessor
variable = group2
execute_on = linear
[]
[group1max]
type = NodalExtremeValue
value_type = max
variable = group1
execute_on = timestep_end
[]
[group2max]
type = NodalExtremeValue
value_type = max
variable = group2
execute_on = timestep_end
[]
[src_resid_post]
type = NodalL2Norm
variable = src_resid
execute_on = nonlinear
[]
[diffus_resid_post]
type = NodalL2Norm
variable = diffus_resid
execute_on = nonlinear
[]
[bc_resid_post]
type = NodalL2Norm
variable = bc_resid
execute_on = nonlinear
[]
[tot_resid_post]
type = NodalL2Norm
variable = tot_resid
execute_on = nonlinear
[]
[group1diff]
type = ElementL2Diff
variable = group1
execute_on = 'linear timestep_end'
use_displaced_mesh = false
[]
[]
[Outputs]
[out]
type = Exodus
execute_on = 'timestep_end'
[]
[]
[Debug]
show_var_residual_norms = true
[]
[ICs]
[temp_ic]
type = ConstantIC
variable = temp
value = 900
[]
[]
(problems/transient-jac-test.i)
flow_velocity = 147 # Cammi 147 cm/s
[GlobalParams]
num_groups = 2
num_precursor_groups = 8
group_fluxes = 'group1 group2'
# MSRE full power = 10 MW; core volume 90 ft3
# power = 200000
temperature = temp
[]
[Mesh]
type = GeneratedMesh
dim = 2
nx = 2
ny = 1
block_id = '0'
block_name = 'fuel'
[]
[MeshModifiers]
[bounding_box]
type = SubdomainBoundingBox
bottom_left = '0.5 0 0'
top_right = '1 1 0'
block_id = '1'
block_name = 'moder'
[]
[]
[Variables]
# [./pre1]
# [../]
[group1]
order = FIRST
family = LAGRANGE
[]
[group2]
order = FIRST
family = LAGRANGE
[]
[temp]
order = FIRST
family = LAGRANGE
scaling = 1e-3
[]
[]
[Kernels]
# Neutronics
[time_group1]
type = NtTimeDerivative
group_number = 1
variable = group1
[]
[time_group2]
type = NtTimeDerivative
group_number = 2
variable = group2
[]
[diff_group1]
type = GroupDiffusion
variable = group1
group_number = 1
[]
[diff_group2]
type = GroupDiffusion
variable = group2
group_number = 2
[]
[sigma_r_group1]
type = SigmaR
variable = group1
group_number = 1
[]
[sigma_r_group2]
type = SigmaR
variable = group2
group_number = 2
[]
[inscatter_group1]
type = InScatter
variable = group1
group_number = 1
num_groups = 2
group_fluxes = 'group1 group2'
[]
[inscatter_group2]
type = InScatter
variable = group2
group_number = 2
num_groups = 2
group_fluxes = 'group1 group2'
[]
[fission_source_group1]
type = CoupledFissionKernel
variable = group1
group_number = 1
num_groups = 2
group_fluxes = 'group1 group2'
[]
[fission_source_group2]
type = CoupledFissionKernel
variable = group2
group_number = 2
num_groups = 2
group_fluxes = 'group1 group2'
[]
# Temperature
[temp_flow_fuel]
block = 'fuel'
type = MatINSTemperatureRZ
variable = temp
rho = 'rho'
k = 'k'
cp = 'cp'
uz = ${flow_velocity}
[]
[temp_flow_moder]
block = 'moder'
type = MatINSTemperatureRZ
variable = temp
rho = 'rho'
k = 'k'
cp = 'cp'
[]
[temp_source]
type = TransientFissionHeatSource
variable = temp
[]
[]
# Delayed neutron precursors
[Precursors]
var_name_base = pre
v_def = ${flow_velocity}
# block = 'fuel'
inlet_boundary = 'bottom'
inlet_boundary_condition = 'NeumannBC'
inlet_bc_value = 1.1
outlet_boundary = 'top'
temperature = temp
incompressible_flow = false
transient_simulation = true
use_exp_form = false
jac_test = true
# initial_condition = -20
[]
# [AuxVariables]
# [./pre1_lin]
# family = MONOMIAL
# order = CONSTANT
# [../]
# [./Qf]
# family = MONOMIAL
# order = CONSTANT
# [../]
# [./diffus_temp]
# family = MONOMIAL
# order = CONSTANT
# [../]
# [./diffus_resid]
# family = LAGRANGE
# order = FIRST
# [../]
# [./src_resid]
# family = LAGRANGE
# order = FIRST
# [../]
# [./bc_resid]
# family = LAGRANGE
# order = FIRST
# [../]
# [./tot_resid]
# family = LAGRANGE
# order = FIRST
# [../]
# [../]
# [AuxKernels]
# [./pre1_lin]
# variable = pre1_lin
# density_log = pre1
# type = Density
# [../]
# [./Qf]
# type = FissionHeatSourceAux
# variable = Qf
# tot_fissions = tot_fissions
# [../]
# [./diffus_temp]
# type = MatDiffusionAux
# variable = diffus_temp
# diffuse_var = temp
# prop_name = 'k'
# [../]
# []
[Materials]
[fuel]
type = GenericMoltresMaterial
block = 'fuel'
property_tables_root = 'msr2g_enrU_mod_953_fuel_interp_'
num_groups = 2
num_precursor_groups = 8
prop_names = 'k rho cp'
prop_values = '.0123 3.327e-3 1357' # Cammi 2011 at 908 K
[]
[moder]
type = GenericMoltresMaterial
block = 'moder'
property_tables_root = 'msr2g_enrU_fuel_922_mod_interp_'
num_groups = 2
num_precursor_groups = 8
prop_names = 'k rho cp'
prop_values = '.312 1.843e-3 1760' # Cammi 2011 at 908 K
[]
[]
[BCs]
# [./temp_inlet]
# boundary = 'fuel_bottom graphite_bottom'
# type = DirichletBC
# variable = temp
# value = 900
# [../]
# [./temp_outlet]
# boundary = 'fuel_top'
# type = MatINSTemperatureNoBCBC
# variable = temp
# k = 'k'
# [../]
# [./group1_vacuum]
# type = VacuumBC
# variable = group1
# boundary = 'fuel_top graphite_top fuel_bottom graphite_bottom'
# [../]
# [./group2_vacuum]
# type = VacuumBC
# variable = group2
# boundary = 'fuel_top graphite_top fuel_bottom graphite_bottom'
# [../]
[]
[Problem]
type = FEProblem
coord_type = RZ
kernel_coverage_check = false
[]
[Executioner]
type = Transient
end_time = 10
nl_abs_tol = 1e-11
# solve_type = 'PJFNK'
solve_type = 'NEWTON'
petsc_options = '-snes_converged_reason -ksp_converged_reason -snes_linesearch_monitor -snes_test_display'
# This system will not converge with default preconditioning; need to use asm
petsc_options_iname = '-snes_type'
petsc_options_value = 'test'
dtmin = 1e-7
[TimeStepper]
type = IterationAdaptiveDT
cutback_factor = 0.4
dt = 1e-4
growth_factor = 1.2
optimal_iterations = 20
nl_max_its = 50
[]
[]
[Preconditioning]
[SMP]
type = SMP
full = true
[]
[]
# [Postprocessors]
# [./bnorm]
# type = ElmIntegTotFissNtsPostprocessor
# group_fluxes = 'group1 group2'
# execute_on = linear
# [../]
# [./tot_fissions]
# type = ElmIntegTotFissPostprocessor
# execute_on = linear
# [../]
# [./group1norm]
# type = ElementIntegralVariablePostprocessor
# variable = group1
# execute_on = linear
# [../]
# [./group2norm]
# type = ElementIntegralVariablePostprocessor
# variable = group2
# execute_on = linear
# [../]
# [./group1max]
# type = NodalExtremeValue
value_type = max
# variable = group1
# execute_on = timestep_end
# [../]
# [./group2max]
# type = NodalExtremeValue
value_type = max
# variable = group2
# execute_on = timestep_end
# [../]
# [./group1diff]
# type = ElementL2Diff
# variable = group1
# execute_on = 'linear timestep_end'
# use_displaced_mesh = false
# [../]
# []
[Outputs]
[out]
type = Exodus
execute_on = 'initial timestep_end'
[]
[dof_map]
type = DOFMap
[]
[]
[Debug]
show_var_residual_norms = true
[]
[ICs]
[temp_ic]
type = RandomIC
variable = temp
min = 900
max = 1400
[]
[group1_ic]
type = RandomIC
variable = group1
min = 0
max = 600
[]
[group2_ic]
type = RandomIC
variable = group2
min = 0
max = 600
[]
# [./pre1_ic]
# type = ConstantIC
# variable = pre1
# value = -20
# [../]
[]
(problems/gmsh-mesh-two-materials.i)
[GlobalParams]
num_groups = 2
temperature = temp
group_fluxes = 'group1 group2'
# MSRE full power = 10 MW; core volume 90 ft3
power = 10
[]
[Mesh]
file = '/home/lindsayad/gdrive/gmsh-scripts/2d-msr.msh'
[]
[Variables]
[group1]
order = FIRST
family = LAGRANGE
[]
[group2]
order = FIRST
family = LAGRANGE
[]
[temp]
order = FIRST
family = LAGRANGE
scaling = 1e-6
[]
[]
[Kernels]
# Neutronics
[diff_group1]
type = GroupDiffusion
variable = group1
group_number = 1
[]
[diff_group2]
type = GroupDiffusion
variable = group2
group_number = 2
[]
[sigma_r_group1]
type = SigmaR
variable = group1
group_number = 1
[]
[sigma_r_group2]
type = SigmaR
variable = group2
group_number = 2
[]
[inscatter_group1]
type = InScatter
variable = group1
group_number = 1
num_groups = 2
group_fluxes = 'group1 group2'
[]
[inscatter_group2]
type = InScatter
variable = group2
group_number = 2
num_groups = 2
group_fluxes = 'group1 group2'
[]
[fission_source_group1]
type = CoupledFissionEigenKernel
variable = group1
group_number = 1
num_groups = 2
group_fluxes = 'group1 group2'
[]
[fission_source_group2]
type = CoupledFissionEigenKernel
variable = group2
group_number = 2
num_groups = 2
group_fluxes = 'group1 group2'
[]
# Temperature
[temp_cond]
type = MatDiffusion
variable = temp
prop_name = 'k'
save_in = 'diffus_resid tot_resid'
[]
# [./temp_cond]
# type = HeatConduction
# diffusion_coefficient_name = k
# diffusion_coefficient_dT_name = d_k_d_temp
# use_displaced_mesh = false
# variable = temp
# [../]
[temp_source]
type = FissionHeatSource
tot_fissions = tot_fissions
variable = temp
save_in = 'src_resid tot_resid'
[]
[]
[AuxVariables]
[Qf]
family = MONOMIAL
order = CONSTANT
[]
[diffus_temp]
family = MONOMIAL
order = CONSTANT
[]
[diffus_resid]
family = LAGRANGE
order = FIRST
[]
[src_resid]
family = LAGRANGE
order = FIRST
[]
[bc_resid]
family = LAGRANGE
order = FIRST
[]
[tot_resid]
family = LAGRANGE
order = FIRST
[]
[]
[AuxKernels]
[Qf]
type = FissionHeatSourceAux
variable = Qf
tot_fissions = tot_fissions
[]
[diffus_temp]
type = MatDiffusionAux
variable = diffus_temp
diffuse_var = temp
prop_name = 'k'
[]
[]
[Materials]
[fuel]
type = GenericMoltresMaterial
block = 'fuel'
property_tables_root = '/home/lindsayad/serpent/core/examples/serpent-input/msre/msr2g_enrU_mod_953_fuel_interp_'
num_groups = 2
prop_names = 'k'
prop_values = '.0123' # Cammi 2011 at 908 K
# prop_names = 'k d_k_d_temp'
# prop_values = '.0123 0' # Cammi 2011 at 908 K
[]
[moder]
type = GenericMoltresMaterial
block = 'moder'
property_tables_root = '/home/lindsayad/serpent/core/examples/serpent-input/msre/msr2g_enrU_fuel_922_mod_interp_'
num_groups = 2
prop_names = 'k'
prop_values = '.312' # Cammi 2011 at 908 K
# prop_names = 'k d_k_d_temp'
# prop_values = '.312 0' # Cammi 2011 at 908 K
[]
[]
[BCs]
[temp]
boundary = 'boundary'
type = DirichletBC
variable = temp
value = 900
save_in = 'bc_resid tot_resid'
[]
# [./temp]
# boundary = boundary
# type = VacuumBC
# variable = temp
# [../]
[]
[Executioner]
# type = NonlinearEigen
# free_power_iterations = 4
# source_abs_tol = 1e-12
# source_rel_tol = 1e-8
# output_after_power_iterations = true
type = InversePowerMethod
max_power_iterations = 50
xdiff = 'group1diff'
bx_norm = 'bnorm'
k0 = 1.0
pfactor = 1e-2
l_max_its = 100
solve_type = 'PJFNK'
# solve_type = 'NEWTON'
petsc_options = '-snes_converged_reason -ksp_converged_reason -snes_linesearch_monitor'
# petsc_options_iname = '-pc_type -sub_pc_type'
# petsc_options_value = 'asm lu'
[]
[Preconditioning]
[SMP]
type = SMP
# full = true
[]
[]
[Postprocessors]
[bnorm]
type = ElmIntegTotFissNtsPostprocessor
group_fluxes = 'group1 group2'
execute_on = linear
[]
[tot_fissions]
type = ElmIntegTotFissPostprocessor
execute_on = linear
[]
[group1norm]
type = ElementIntegralVariablePostprocessor
variable = group1
execute_on = linear
[]
[group2norm]
type = ElementIntegralVariablePostprocessor
variable = group2
execute_on = linear
[]
[group1max]
type = NodalExtremeValue
value_type = max
variable = group1
execute_on = timestep_end
[]
[group2max]
type = NodalExtremeValue
value_type = max
variable = group2
execute_on = timestep_end
[]
[src_resid_post]
type = NodalL2Norm
variable = src_resid
execute_on = nonlinear
[]
[diffus_resid_post]
type = NodalL2Norm
variable = diffus_resid
execute_on = nonlinear
[]
[bc_resid_post]
type = NodalL2Norm
variable = bc_resid
execute_on = nonlinear
[]
[tot_resid_post]
type = NodalL2Norm
variable = tot_resid
execute_on = nonlinear
[]
[group1diff]
type = ElementL2Diff
variable = group1
execute_on = 'linear timestep_end'
use_displaced_mesh = false
[]
[]
[Outputs]
[out]
type = Exodus
execute_on = 'timestep_end'
[]
[]
[Debug]
show_var_residual_norms = true
[]
[ICs]
[temp_ic]
type = ConstantIC
variable = temp
value = 900
[]
[]
(problems/debug-precursor-action.i)
flow_velocity = 147 # Cammi 147 cm/s
[GlobalParams]
num_groups = 2
num_precursor_groups = 1
group_fluxes = 'group1 group2'
# MSRE full power = 10 MW; core volume 90 ft3
power = 200000
[]
[Mesh]
type = GeneratedMesh
dim = 2
nx = 2
ny = 2
block_id = 0
block_name = 'fuel'
[]
[MeshModifiers]
[mod]
type = SubdomainBoundingBox
bottom_left = '0.5 0 0'
top_right = '1 1 0'
block_id = 1
block_name = 'moder'
[]
[]
[Variables]
# [./pre1]
# [../]
[group1]
order = FIRST
family = LAGRANGE
[]
[group2]
order = FIRST
family = LAGRANGE
[]
[temp]
order = FIRST
family = LAGRANGE
scaling = 1e-3
[]
[]
[Kernels]
# Neutronics
# [./time_group1]
# type = NtTimeDerivative
# grou_number = 1
# variable = group1
# [../]
# [./time_group2]
# type = NtTimeDerivative
# grou_number = 2
# variable = group2
# [../]
[diff_group1]
type = GroupDiffusion
variable = group1
group_number = 1
temperature = temp
[]
[diff_group2]
type = GroupDiffusion
variable = group2
group_number = 2
temperature = temp
[]
[sigma_r_group1]
type = SigmaR
variable = group1
group_number = 1
temperature = temp
[]
[sigma_r_group2]
type = SigmaR
variable = group2
group_number = 2
temperature = temp
[]
[inscatter_group1]
type = InScatter
variable = group1
group_number = 1
num_groups = 2
group_fluxes = 'group1 group2'
temperature = temp
[]
[inscatter_group2]
type = InScatter
variable = group2
group_number = 2
num_groups = 2
group_fluxes = 'group1 group2'
temperature = temp
[]
[fission_source_group1]
type = CoupledFissionEigenKernel
variable = group1
group_number = 1
num_groups = 2
group_fluxes = 'group1 group2'
temperature = temp
[]
[fission_source_group2]
type = CoupledFissionEigenKernel
variable = group2
group_number = 2
num_groups = 2
group_fluxes = 'group1 group2'
temperature = temp
[]
# [./fission_source_group1]
# type = CoupledFissionKernel
# variable = group1
# group_number = 1
# num_groups = 2
# group_fluxes = 'group1 group2'
# temperature = temp
# [../]
# [./fission_source_group2]
# type = CoupledFissionKernel
# variable = group2
# group_number = 2
# num_groups = 2
# group_fluxes = 'group1 group2'
# temperature = temp
# [../]
# Temperature
# [./temp_cond]
# type = MatDiffusion
# variable = temp
# prop_name = 'k'
# [../]
[temp_flow_fuel]
block = 'fuel'
type = MatINSTemperatureRZ
variable = temp
rho = 'rho'
k = 'k'
cp = 'cp'
uz = ${flow_velocity}
[]
[temp_flow_moder]
block = 'moder'
type = MatINSTemperatureRZ
variable = temp
rho = 'rho'
k = 'k'
cp = 'cp'
[]
[temp_source]
type = FissionHeatSource
tot_fissions = tot_fissions
variable = temp
[]
# # Delayed neutron precursors
# [./pre1_source]
# type = PrecursorSource
# variable = pre1
# precursor_group_number = 1
# temperature = temp
# [../]
# [./pre1_decay]
# type = PrecursorDecay
# variable = pre1
# precursor_group_number = 2
# temperature = temp
# [../]
[]
[Precursors]
var_name_base = pre
# v_def = ${flow_velocity}
# block = 'fuel'
inlet_boundary = 'bottom'
inlet_boundary_condition = 'DirichletBC'
inlet_dirichlet_value = 0
outlet_boundary = 'top'
T = temp
[]
[AuxVariables]
[Qf]
family = MONOMIAL
order = CONSTANT
[]
# [./diffus_temp]
# family = MONOMIAL
# order = CONSTANT
# [../]
# [./diffus_resid]
# family = LAGRANGE
# order = FIRST
# [../]
# [./src_resid]
# family = LAGRANGE
# order = FIRST
# [../]
# [./bc_resid]
# family = LAGRANGE
# order = FIRST
# [../]
# [./tot_resid]
# family = LAGRANGE
# order = FIRST
# [../]
[]
[AuxKernels]
[Qf]
type = FissionHeatSourceAux
variable = Qf
tot_fissions = tot_fissions
[]
# [./diffus_temp]
# type = MatDiffusionAux
# variable = diffus_temp
# diffuse_var = temp
# prop_name = 'k'
# [../]
[]
[Materials]
[fuel]
type = GenericMoltresMaterial
block = 'fuel'
property_tables_root = 'msr2g_enrU_mod_953_fuel_interp_'
num_groups = 2
num_precursor_groups = 8
prop_names = 'k rho cp'
prop_values = '.0123 3.327e-3 1357' # Cammi 2011 at 908 K
temperature = temp
[]
[moder]
type = GenericMoltresMaterial
block = 'moder'
property_tables_root = 'msr2g_enrU_fuel_922_mod_interp_'
num_groups = 2
num_precursor_groups = 8
prop_names = 'k rho cp'
prop_values = '.312 1.843e-3 1760' # Cammi 2011 at 908 K
temperature = temp
[]
[]
[BCs]
[temp_inlet]
boundary = 'bottom'
type = DirichletBC
variable = temp
value = 900
[]
[temp_outlet]
boundary = 'top'
type = MatINSTemperatureNoBCBC
variable = temp
k = 'k'
[]
[group1_vacuum]
type = VacuumBC
variable = group1
boundary = 'top bottom'
[]
[group2_vacuum]
type = VacuumBC
variable = group2
boundary = 'top bottom'
[]
[]
[Problem]
type = FEProblem
coord_type = RZ
[]
[Executioner]
type = NonlinearEigen
free_power_iterations = 2
source_abs_tol = 1e-12
source_rel_tol = 1e-8
output_after_power_iterations = false
# type = InversePowerMethod
# max_power_iterations = 50
# xdiff = 'group1diff'
bx_norm = 'bnorm'
k0 = 1.7
pfactor = 1e-2
l_max_its = 100
line_search = none
# solve_type = 'PJFNK'
solve_type = 'NEWTON'
petsc_options = '-snes_converged_reason -ksp_converged_reason -snes_linesearch_monitor -snes_test_display'
# This system will not converge with default preconditioning; need to use asm
petsc_options_iname = '-pc_type -sub_pc_type -sub_ksp_type -pc_asm_overlap -ksp_gmres_restart'
petsc_options_value = 'asm lu preonly 2 31'
# petsc_options_iname = '-snes_type'
# petsc_options_value = 'test'
[]
[Preconditioning]
[SMP]
type = SMP
full = true
[]
[]
[Postprocessors]
[bnorm]
type = ElmIntegTotFissNtsPostprocessor
group_fluxes = 'group1 group2'
execute_on = linear
[]
[tot_fissions]
type = ElmIntegTotFissPostprocessor
execute_on = linear
[]
[group1norm]
type = ElementIntegralVariablePostprocessor
variable = group1
execute_on = linear
[]
[group2norm]
type = ElementIntegralVariablePostprocessor
variable = group2
execute_on = linear
[]
[group1max]
type = NodalExtremeValue
value_type = max
variable = group1
execute_on = timestep_end
[]
[group2max]
type = NodalExtremeValue
value_type = max
variable = group2
execute_on = timestep_end
[]
[group1diff]
type = ElementL2Diff
variable = group1
execute_on = 'linear timestep_end'
use_displaced_mesh = false
[]
[]
[Outputs]
[out]
type = Exodus
execute_on = 'timestep_end'
[]
[]
[Debug]
show_var_residual_norms = true
[]
[ICs]
[temp_ic]
type = ConstantIC
variable = temp
value = 900
[]
[]
(problems/axi-nts-temp-delayed.i)
flow_velocity = 147 # Cammi 147 cm/s
[GlobalParams]
num_groups = 2
num_precursor_groups = 8
group_fluxes = 'group1 group2'
# MSRE full power = 10 MW; core volume 90 ft3
power = 200000
[]
[Mesh]
file = 'axisymm_cylinder.msh'
[]
[Variables]
# [./pre1]
# [../]
[group1]
order = FIRST
family = LAGRANGE
[]
[group2]
order = FIRST
family = LAGRANGE
[]
[temp]
order = FIRST
family = LAGRANGE
scaling = 1e-3
[]
[]
[Kernels]
# Neutronics
# [./time_group1]
# type = NtTimeDerivative
# grou_number = 1
# variable = group1
# [../]
# [./time_group2]
# type = NtTimeDerivative
# grou_number = 2
# variable = group2
# [../]
[diff_group1]
type = GroupDiffusion
variable = group1
group_number = 1
temperature = temp
[]
[diff_group2]
type = GroupDiffusion
variable = group2
group_number = 2
temperature = temp
[]
[sigma_r_group1]
type = SigmaR
variable = group1
group_number = 1
temperature = temp
[]
[sigma_r_group2]
type = SigmaR
variable = group2
group_number = 2
temperature = temp
[]
[inscatter_group1]
type = InScatter
variable = group1
group_number = 1
num_groups = 2
group_fluxes = 'group1 group2'
temperature = temp
[]
[inscatter_group2]
type = InScatter
variable = group2
group_number = 2
num_groups = 2
group_fluxes = 'group1 group2'
temperature = temp
[]
[fission_source_group1]
type = CoupledFissionEigenKernel
variable = group1
group_number = 1
num_groups = 2
group_fluxes = 'group1 group2'
temperature = temp
[]
[fission_source_group2]
type = CoupledFissionEigenKernel
variable = group2
group_number = 2
num_groups = 2
group_fluxes = 'group1 group2'
temperature = temp
[]
# [./fission_source_group1]
# type = CoupledFissionKernel
# variable = group1
# group_number = 1
# num_groups = 2
# group_fluxes = 'group1 group2'
# temperature = temp
# [../]
# [./fission_source_group2]
# type = CoupledFissionKernel
# variable = group2
# group_number = 2
# num_groups = 2
# group_fluxes = 'group1 group2'
# temperature = temp
# [../]
# Temperature
# [./temp_cond]
# type = MatDiffusion
# variable = temp
# prop_name = 'k'
# [../]
[temp_flow_fuel]
block = 'fuel'
type = MatINSTemperatureRZ
variable = temp
rho = 'rho'
k = 'k'
cp = 'cp'
uz = ${flow_velocity}
[]
[temp_flow_moder]
block = 'moder'
type = MatINSTemperatureRZ
variable = temp
rho = 'rho'
k = 'k'
cp = 'cp'
[]
[temp_source]
type = FissionHeatSource
tot_fissions = tot_fissions
variable = temp
[]
[]
[Precursors]
var_name_base = pre
v_def = ${flow_velocity}
block = 'fuel'
inlet_boundary = 'fuel_bottom'
inlet_boundary_condition = 'DirichletBC'
inlet_dirichlet_value = -20
outlet_boundary = 'fuel_top'
T = temp
incompressible_flow = false
use_exp_form = true
initial_condition = -20
[]
[AuxVariables]
[Qf]
family = MONOMIAL
order = CONSTANT
[]
[pre1_lin]
family = MONOMIAL
order = CONSTANT
[]
# [./diffus_temp]
# family = MONOMIAL
# order = CONSTANT
# [../]
# [./diffus_resid]
# family = LAGRANGE
# order = FIRST
# [../]
# [./src_resid]
# family = LAGRANGE
# order = FIRST
# [../]
# [./bc_resid]
# family = LAGRANGE
# order = FIRST
# [../]
# [./tot_resid]
# family = LAGRANGE
# order = FIRST
# [../]
[]
[AuxKernels]
[Qf]
type = FissionHeatSourceAux
variable = Qf
tot_fissions = tot_fissions
[]
[pre1_lin]
variable = pre1_lin
density_log = pre1
type = Density
[]
# [./diffus_temp]
# type = MatDiffusionAux
# variable = diffus_temp
# diffuse_var = temp
# prop_name = 'k'
# [../]
[]
[Materials]
[fuel]
type = GenericMoltresMaterial
block = 'fuel'
property_tables_root = 'msr2g_enrU_mod_953_fuel_interp_'
num_groups = 2
num_precursor_groups = 8
prop_names = 'k rho cp'
prop_values = '.0123 3.327e-3 1357' # Cammi 2011 at 908 K
temperature = temp
[]
[moder]
type = GenericMoltresMaterial
block = 'moder'
property_tables_root = 'msr2g_enrU_fuel_922_mod_interp_'
num_groups = 2
num_precursor_groups = 8
prop_names = 'k rho cp'
prop_values = '.312 1.843e-3 1760' # Cammi 2011 at 908 K
temperature = temp
[]
[]
[BCs]
[temp_inlet]
boundary = 'fuel_bottom graphite_bottom'
type = DirichletBC
variable = temp
value = 900
[]
[temp_outlet]
boundary = 'fuel_top'
type = MatINSTemperatureNoBCBC
variable = temp
k = 'k'
[]
[group1_vacuum]
type = VacuumBC
variable = group1
boundary = 'fuel_top graphite_top fuel_bottom graphite_bottom'
[]
[group2_vacuum]
type = VacuumBC
variable = group2
boundary = 'fuel_top graphite_top fuel_bottom graphite_bottom'
[]
[]
[Problem]
type = FEProblem
coord_type = RZ
[]
[Executioner]
type = NonlinearEigen
free_power_iterations = 2
source_abs_tol = 1e-12
source_rel_tol = 1e-8
output_after_power_iterations = false
# type = InversePowerMethod
# max_power_iterations = 50
# xdiff = 'group1diff'
bx_norm = 'bnorm'
k0 = 1.7
pfactor = 1e-2
l_max_its = 100
# line_search = none
solve_type = 'PJFNK'
# solve_type = 'NEWTON'
petsc_options = '-snes_converged_reason -ksp_converged_reason -snes_linesearch_monitor'
# This system will not converge with default preconditioning; need to use asm
petsc_options_iname = '-pc_type -sub_pc_type -sub_ksp_type -pc_asm_overlap -ksp_gmres_restart'
petsc_options_value = 'asm lu preonly 2 31'
[]
[Preconditioning]
[SMP]
type = SMP
full = true
[]
[]
[Postprocessors]
[bnorm]
type = ElmIntegTotFissNtsPostprocessor
group_fluxes = 'group1 group2'
execute_on = linear
[]
[tot_fissions]
type = ElmIntegTotFissPostprocessor
execute_on = linear
[]
[group1norm]
type = ElementIntegralVariablePostprocessor
variable = group1
execute_on = linear
[]
[group2norm]
type = ElementIntegralVariablePostprocessor
variable = group2
execute_on = linear
[]
[group1max]
type = NodalExtremeValue
value_type = max
variable = group1
execute_on = timestep_end
[]
[group2max]
type = NodalExtremeValue
value_type = max
variable = group2
execute_on = timestep_end
[]
[group1diff]
type = ElementL2Diff
variable = group1
execute_on = 'linear timestep_end'
use_displaced_mesh = false
[]
[]
[Outputs]
[out]
type = Exodus
execute_on = 'timestep_end'
[]
[]
[Debug]
show_var_residual_norms = true
[]
[ICs]
[temp_ic]
type = ConstantIC
variable = temp
value = 900
[]
[]
(problems/gen-mesh-one-material.i)
[GlobalParams]
num_groups = 2
temperature = temp
group_fluxes = 'group1 group2'
# MSRE full power = 10 MW; core volume 90 ft3
power = 10
[]
[Mesh]
type = GeneratedMesh
dim = 2
xmax = 6
ymax = 6
nx = 15
ny = 15
[]
[Variables]
[group1]
order = FIRST
family = LAGRANGE
[]
[group2]
order = FIRST
family = LAGRANGE
[]
[temp]
order = FIRST
family = LAGRANGE
scaling = 1e-6
[]
[]
[Kernels]
# Neutronics
[diff_group1]
type = GroupDiffusion
variable = group1
group_number = 1
[]
[diff_group2]
type = GroupDiffusion
variable = group2
group_number = 2
[]
[sigma_r_group1]
type = SigmaR
variable = group1
group_number = 1
[]
[sigma_r_group2]
type = SigmaR
variable = group2
group_number = 2
[]
[inscatter_group1]
type = InScatter
variable = group1
group_number = 1
num_groups = 2
group_fluxes = 'group1 group2'
[]
[inscatter_group2]
type = InScatter
variable = group2
group_number = 2
num_groups = 2
group_fluxes = 'group1 group2'
[]
[fission_source_group1]
type = CoupledFissionEigenKernel
variable = group1
group_number = 1
num_groups = 2
group_fluxes = 'group1 group2'
[]
[fission_source_group2]
type = CoupledFissionEigenKernel
variable = group2
group_number = 2
num_groups = 2
group_fluxes = 'group1 group2'
[]
# Temperature
[temp_cond]
type = MatDiffusion
variable = temp
prop_name = 'k'
save_in = 'diffus_resid tot_resid'
[]
# [./temp_cond]
# type = HeatConduction
# diffusion_coefficient_name = k
# diffusion_coefficient_dT_name = d_k_d_temp
# use_displaced_mesh = false
# variable = temp
# [../]
[temp_source]
type = FissionHeatSource
tot_fissions = tot_fissions
variable = temp
save_in = 'src_resid tot_resid'
[]
[]
[AuxVariables]
[Qf]
family = MONOMIAL
order = CONSTANT
[]
[diffus_temp]
family = MONOMIAL
order = CONSTANT
[]
[diffus_resid]
family = LAGRANGE
order = FIRST
[]
[src_resid]
family = LAGRANGE
order = FIRST
[]
[bc_resid]
family = LAGRANGE
order = FIRST
[]
[tot_resid]
family = LAGRANGE
order = FIRST
[]
[]
[AuxKernels]
[Qf]
type = FissionHeatSourceAux
variable = Qf
tot_fissions = tot_fissions
[]
[diffus_temp]
type = MatDiffusionAux
variable = diffus_temp
diffuse_var = temp
prop_name = 'k'
[]
[]
[Materials]
[fuel]
type = GenericMoltresMaterial
block = 0
property_tables_root = '/home/lindsayad/serpent/core/examples/serpent-input/msre/msr2g_enrU_mod_953_fuel_interp_'
num_groups = 2
prop_names = 'k'
prop_values = '.0123' # Cammi 2011 at 908 K
# prop_names = 'k d_k_d_temp'
# prop_values = '.0123 0' # Cammi 2011 at 908 K
[]
[]
[BCs]
[temp]
boundary = 'left right top bottom'
type = DirichletBC
variable = temp
value = 900
save_in = 'bc_resid tot_resid'
[]
# [./temp]
# boundary = boundary
# type = VacuumBC
# variable = temp
# [../]
[]
[Executioner]
# type = NonlinearEigen
# free_power_iterations = 4
# source_abs_tol = 1e-12
# source_rel_tol = 1e-8
# output_after_power_iterations = true
type = InversePowerMethod
max_power_iterations = 50
xdiff = 'group1diff'
bx_norm = 'bnorm'
k0 = 1.0
pfactor = 1e-2
l_max_its = 100
solve_type = 'PJFNK'
# solve_type = 'NEWTON'
petsc_options = '-snes_converged_reason -ksp_converged_reason -snes_linesearch_monitor'
# petsc_options_iname = '-pc_type -sub_pc_type'
# petsc_options_value = 'asm lu'
[]
[Preconditioning]
[SMP]
type = SMP
# full = true
[]
[]
[Postprocessors]
[bnorm]
type = ElmIntegTotFissNtsPostprocessor
group_fluxes = 'group1 group2'
execute_on = linear
[]
[tot_fissions]
type = ElmIntegTotFissPostprocessor
execute_on = linear
[]
[group1norm]
type = ElementIntegralVariablePostprocessor
variable = group1
execute_on = linear
[]
[group2norm]
type = ElementIntegralVariablePostprocessor
variable = group2
execute_on = linear
[]
[group1max]
type = NodalExtremeValue
value_type = max
variable = group1
execute_on = timestep_end
[]
[group2max]
type = NodalExtremeValue
value_type = max
variable = group2
execute_on = timestep_end
[]
[src_resid_post]
type = NodalL2Norm
variable = src_resid
execute_on = nonlinear
[]
[diffus_resid_post]
type = NodalL2Norm
variable = diffus_resid
execute_on = nonlinear
[]
[bc_resid_post]
type = NodalL2Norm
variable = bc_resid
execute_on = nonlinear
[]
[tot_resid_post]
type = NodalL2Norm
variable = tot_resid
execute_on = nonlinear
[]
[group1diff]
type = ElementL2Diff
variable = group1
execute_on = 'linear timestep_end'
use_displaced_mesh = false
[]
[]
[Outputs]
[out]
type = Exodus
execute_on = 'timestep_end'
[]
[]
[Debug]
show_var_residual_norms = true
[]
[ICs]
[temp_ic]
type = ConstantIC
variable = temp
value = 900
[]
[]